eRL-BE365 Deadbolt Lock

Certification

Grade 2 ANSI/BHMA certified.

Durability

Lifetime guarantee for mechanics and finish.

Weather

Weather Resistance with UL/BHMA approved for high humidity use.
Silicone Conformal Coating is used to provide an all-round protective coating for electronic board against moisture, corrosion, and thermal shock.

Keypad

Unlocking

Access Code:
1. Program-generated a 10-digit Access Code.
2. User-created a 3-6 digit Personalized Code.
3. No time-related Private Master Code.

Backup Key:

Schlage standard 5-pin C-Keyway backup key for emergency override.

Audit Trail

1000 event capacity Audit Trail

Access Code Types

For Guest:
1. Short term stay – Control stay length from one hour to 31 days, check-in/check-out time at any hour of the day.
2. Long term stay – Control stay length from 32 days to 732 days (2 years).

For Personnel:
1. Short term staff – Control employment term from one day to 31 days, daily start/end work time at any hour of the day.
2. Long term staff – Control employment term from one month to 24 months (2 years), daily start/end work time at any hour of the day.
3. One time use code – Control the external service people to access the property only one time on appointed day.

For Facility:
1. Short term use – Control use term from one day to 31 days, daily open/close time at any hour of the day.
2. Long term use – Control use term from one month to 24 months (2 years), daily open/close time at any hour of the day.
3. One time use code – Control the external service people to access the facility only one time on appointed day.

For Group:
It’s used for staff only. One group Access Code to access all eRL Locks which are defined in the same Group.
1. Short term staff – Control employment term from one day to 31 days, daily start/end work time at any hour of the day.
2. Long term staff – Control employment term from one month to 24 months (2 years), daily start/end work time at any hour of the day.
3. One time use code – Control the external service people to access the property only one time on appointed day.

User Code Capacity

If using program generated 10-digit access codes:
Unlimited program generated 10-digit Access Codes can be used to access at the same time.
If using user-created 3-6 digit Personalized Codes:
Up to 40 user-created 3-6 digits Personalized Codes can be remembered by the lock and used to access at the same time.

Unwanted Codes

Up to 20 valid Access Codes can be disabled at the same time by Private Master Code or another valid Access Code.

Turn Lock Feature

When enabled:
One touch to the Schlage button will allow the door to be manually locked from the outside.
When disabled:
A valid code must be entered at the keypad to manually lock the door from the outside.

Vacation Mode

In Vacation Mode:
All Access Codes and Personalized Codes are disabled.
Out of Vacation Mode:
Unlock by Private Master Code to leave this mode.

Keypad Beeper

Keypad Beeper can be enabled or disabled by keypad command.

Anti-Code Guessing

The keypad is disabled for 30 seconds if incorrect code is entered 3 times in row.

Turn Knob

Vandal resistant free-spinning deadbolt turn with patented commercial grade clutching motor drive, tested to one million cycles.

Body

All-metal chassis and escutcheons.

Power

9V Battery Operated – 3 years average life with low battery warning.

Operation Temperature

-22º F (-30º C) – 140º F (60º C)

Internal Clock

1. < ±5 minute average deviation per year.
2. Backup power inside can keep clock running for at least 24 hours if the lock battery has failed.
3. Automatic Daylight Savings Time and Leap Year correction.

Lock Dimensions

Door Thickness

Fits doors 1 3/8″ to 1 3/4″ (34mm to 45mm) thick.

Door Hole

Covers existing 2 1/8″ door hole.
Adjustable deadbolt to fit 2 3/8″ or 2 3/4″ backset.

Programming Method

Two simple keypad commands:
1. Change the Master Code when setting up the lock for the first time.
2. Adjust the date/time in lock when needed.

Installation

Non-professional DIY product. The easy installation and replacement process only takes about 30 minutes that only involves the use of a screwdriver.